wheel question

[almondgreen]

I can get this wheels:





They are descriped as magnesium wheels.
What do You think ?
Is it possible they are ?

[mk1]

Can't say for certain, but they look pretty good to me.

[steve1071]

As soon as you pick one up you'll know if it's magnesium as they are much lighter.

Nice wheels.

[guru_1071]

As soon as you pick one up you'll know if it's magnesium as they are much lighter.

not always true, the 1960's magnesium wheel Mark has is heavier then both a modern 6x10 genuine minilight and the k&n minator type!

[Vegard]

When did Minilite shift their mag production to Norway?

[mk1]

A 6" Mag minilite weighs around 2.8kg.

[steve1071]

The ones I had were probably so light as they had rotted away!

[nick rogers]

Genuine magnesium wheels will be siginificantly lighter than equivalent aluminium ones. The density of Al is 2.7 gms/cc and of Mg is 1.74 gms/cc.
Magnesium corrodes much faster than aluminium because it is more reactive and does not form nice stable oxide films. Magnesium is actually used to preferentially corrode when in contact with iron (or steel), so on Minis it will corrode badly around the wheel studs for example.
Hope this helps.

[JanWulf]

What does Minilite say? Are theynot able to ID the wheels with the number on the back...?

[mk1]

Genuine magnesium wheels will be siginificantly lighter than equivalent aluminium ones. The density of Al is 2.7 gms/cc and of Mg is 1.74 gms/cc.
Magnesium corrodes much faster than aluminium because it is more reactive and does not form nice stable oxide films. Magnesium is actually used to preferentially corrode when in contact with iron (or steel), so on Minis it will corrode badly around the wheel studs for example.

Sounds like a metallurgist talking to Me

You see.all those years at Uni were worth it in the end

[nick rogers]

Nice one Mark. Yes, I spent all those years preparing for the time when i ran my own mini parts shop.