Hello,
perhaps someone may help. I have got a copy of the FIA Homologation sheet 5405 and the last page is 28/12E. But there is another source claiming, that the last page should be 29/01ER1. Does anyone can clarify this?
Thank you very much!
1275 GT Homologation sheet
- sandman
- 998 Cooper
- Posts: 582
- Joined: Thu Jun 24, 2010 7:24 pm
- Location: Langhus, Norway
Re: 1275 GT Homologation sheet
Hi Astro,
I have both versions/papers;
- "5404-71" paper that is for group 1 and 2. This is 47 pages and the last page is amedment 28/12E covering 1.04 drop gears
- "5404-82" paper for Group A. This is only 16 pages in total. Last page is 29/01 ER and that is only a page that transfere/validate the original paper over to Group A. The last amendment to this paper is, as above, 28/12E dated 1980.
Added: I checked the Fia database and it confirm this; the '71 gr.1/2 paper has 28 extensions - the Gr.A paper has only 5.
Hope this helps.
I have both versions/papers;
- "5404-71" paper that is for group 1 and 2. This is 47 pages and the last page is amedment 28/12E covering 1.04 drop gears
- "5404-82" paper for Group A. This is only 16 pages in total. Last page is 29/01 ER and that is only a page that transfere/validate the original paper over to Group A. The last amendment to this paper is, as above, 28/12E dated 1980.
Added: I checked the Fia database and it confirm this; the '71 gr.1/2 paper has 28 extensions - the Gr.A paper has only 5.
Hope this helps.
Cheers,
Ed_
Ed_
- YMJ
- 1275 Cooper S
- Posts: 1025
- Joined: Thu Jun 24, 2010 2:31 pm
- Location: Beyond the Sun
Re: 1275 GT Homologation sheet
Clear as mud, Ed !sandman wrote:Hi Astro,
I have both versions/papers;
- "5404-71" paper that is for group 1 and 2. This is 47 pages and the last page is amedment 28/12E covering 1.04 drop gears
- "5404-82" paper for Group A. This is only 16 pages in total. Last page is 29/01 ER and that is only a page that transfere/validate the original paper over to Group A. The last amendment to this paper is, as above, 28/12E dated 1980.
Added: I checked the Fia database and it confirm this; the '71 gr.1/2 paper has 28 extensions - the Gr.A paper has only 5.
Hope this helps.
-
- 998 Cooper
- Posts: 355
- Joined: Wed Nov 09, 2011 6:52 am
Re: 1275 GT Homologation sheet
Thanks a lot! Was just hoping to find something about SC drop gears. OK, it will do without.
- Vegard
- 1275 Cooper S
- Posts: 2042
- Joined: Mon Jun 28, 2010 1:33 pm
- Location: Norway
- Contact:
-
- 998 Cooper
- Posts: 355
- Joined: Wed Nov 09, 2011 6:52 am
Re: 1275 GT Homologation sheet
The new french regulations became a bit crazy. That means, it will be more effective to run a group 1. That still means two HS4 or 6, a 300° cam, 37.6mm inlet valves in a nice Longman head, a LCB, a SC gearbox, a 4.3 final. Not bad We tried this years final, and am just looking for the last (hopefully) problems.
You do not have the required permissions to view the files attached to this post.
-
- 998 Cooper
- Posts: 630
- Joined: Thu Sep 02, 2010 9:48 pm
- Location: Dorset
- Been thanked: 1 time
Re: 1275 GT Homologation sheet
Hi Astro, could you post a link to the French hillclimb championship!
Many thanks
Many thanks
-
- 998 Cooper
- Posts: 355
- Joined: Wed Nov 09, 2011 6:52 am