1275 GT Homologation sheet

Discuss all aspects of Classic Minis in Motorsport be it historic or current, the cars, the personalities & the venues
Post Reply
Astro
998 Cooper
Posts: 355
Joined: Wed Nov 09, 2011 6:52 am

1275 GT Homologation sheet

Post by Astro »

Hello,

perhaps someone may help. I have got a copy of the FIA Homologation sheet 5405 and the last page is 28/12E. But there is another source claiming, that the last page should be 29/01ER1. Does anyone can clarify this?

Thank you very much!
User avatar
sandman
998 Cooper
Posts: 582
Joined: Thu Jun 24, 2010 7:24 pm
Location: Langhus, Norway

Re: 1275 GT Homologation sheet

Post by sandman »

Hi Astro,

I have both versions/papers;

- "5404-71" paper that is for group 1 and 2. This is 47 pages and the last page is amedment 28/12E covering 1.04 drop gears
- "5404-82" paper for Group A. This is only 16 pages in total. Last page is 29/01 ER and that is only a page that transfere/validate the original paper over to Group A. The last amendment to this paper is, as above, 28/12E dated 1980.

Added: I checked the Fia database and it confirm this; the '71 gr.1/2 paper has 28 extensions - the Gr.A paper has only 5.


Hope this helps.
Cheers,

Ed_
User avatar
YMJ
1275 Cooper S
Posts: 1025
Joined: Thu Jun 24, 2010 2:31 pm
Location: Beyond the Sun

Re: 1275 GT Homologation sheet

Post by YMJ »

sandman wrote:Hi Astro,

I have both versions/papers;

- "5404-71" paper that is for group 1 and 2. This is 47 pages and the last page is amedment 28/12E covering 1.04 drop gears
- "5404-82" paper for Group A. This is only 16 pages in total. Last page is 29/01 ER and that is only a page that transfere/validate the original paper over to Group A. The last amendment to this paper is, as above, 28/12E dated 1980.

Added: I checked the Fia database and it confirm this; the '71 gr.1/2 paper has 28 extensions - the Gr.A paper has only 5.


Hope this helps.
Clear as mud, Ed ! :lol:
Astro
998 Cooper
Posts: 355
Joined: Wed Nov 09, 2011 6:52 am

Re: 1275 GT Homologation sheet

Post by Astro »

Thanks a lot! Was just hoping to find something about SC drop gears. OK, it will do without.
User avatar
Vegard
1275 Cooper S
Posts: 2042
Joined: Mon Jun 28, 2010 1:33 pm
Location: Norway
Contact:

Re: 1275 GT Homologation sheet

Post by Vegard »

Why? These were indeed used in Gp.2
Astro
998 Cooper
Posts: 355
Joined: Wed Nov 09, 2011 6:52 am

Re: 1275 GT Homologation sheet

Post by Astro »

The new french regulations became a bit crazy. That means, it will be more effective to run a group 1. That still means two HS4 or 6, a 300° cam, 37.6mm inlet valves in a nice Longman head, a LCB, a SC gearbox, a 4.3 final. Not bad :-) We tried this years final, and am just looking for the last (hopefully) problems.
You do not have the required permissions to view the files attached to this post.
davidnutland
998 Cooper
Posts: 630
Joined: Thu Sep 02, 2010 9:48 pm
Location: Dorset
Been thanked: 1 time

Re: 1275 GT Homologation sheet

Post by davidnutland »

Hi Astro, could you post a link to the French hillclimb championship!
Many thanks
Astro
998 Cooper
Posts: 355
Joined: Wed Nov 09, 2011 6:52 am

Re: 1275 GT Homologation sheet

Post by Astro »

modern and classic but only french competitors will be mentioned ;-)

http://www.cfm-challenge.com/
Post Reply