Steering column bushes

Post any technical questions or queries here.
Post Reply
User avatar
sclemow
998 Cooper
Posts: 338
Joined: Thu Jun 24, 2010 1:02 pm
Location: Bristol, UK

Steering column bushes

Post by sclemow »

Hi

Are mk1 steering column bushes the same as later ones?

I thought they were different but the minispares site lists the column bushes as "up to 1985".

If so I guess GSV1095 and GSV1127 will fit?

Cheers

Simon
mk1
Site Admin
Posts: 19846
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times

Re: Steering column bushes

Post by mk1 »

Top & bottom fit fine, I did a set last week.

m
User avatar
sclemow
998 Cooper
Posts: 338
Joined: Thu Jun 24, 2010 1:02 pm
Location: Bristol, UK

Re: Steering column bushes

Post by sclemow »

Thanks Mark.

Simon
User avatar
rich@minispares.com
1275 Cooper S
Posts: 6806
Joined: Thu Aug 08, 2013 3:16 pm
Been thanked: 2 times

Re: Steering column bushes

Post by rich@minispares.com »

don't forget to make sure that the bolt in the bottom is the proper stepped one

really grinds my gears when people bodge them with fully threaded bolts, then wonder why there is play in them!
should you wish, you can contact me on rich@minispares.com

'long beard boss'
mk1
Site Admin
Posts: 19846
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times

Re: Steering column bushes

Post by mk1 »

:roll:
ianh1968
1275 Cooper S
Posts: 1012
Joined: Sat Nov 03, 2012 6:00 pm
Location: West Sussex

Re: Steering column bushes

Post by ianh1968 »

Until fairly recently, and rather embarrassingly, I was un-aware of
the the technical difference between a "bolt" and a "screw".
:oops:
As far as I was concerned, they were all "bolts", but sometimes
some of them get referred to as "screws"...

My local fixings supplier had to point out to me that a "screw"
is threaded all the way up to the head, whereas a "bolt" isn't.

I'd bet that some people put "screws" in the front suspension
tie-bars as well...
:roll: :roll:

Ian
coop12g295
998 Cooper
Posts: 693
Joined: Thu Jun 24, 2010 4:31 pm
Location: Portsmouth Hants

Re: Steering column bushes

Post by coop12g295 »

Or worse the muppet that put the bolt in above the splines and not through the notch
and complained the steering felt vague at times.Bloody lucky the column didn't fall
off the rack
User avatar
spoon.450
1275 Cooper S
Posts: 1808
Joined: Fri Jan 20, 2012 9:13 pm
Location: DERBYSHIRE
Been thanked: 1 time

Re: Steering column bushes

Post by spoon.450 »

Wouldn't be the first time.....
You do not have the required permissions to view the files attached to this post.
mk1
Site Admin
Posts: 19846
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 8 times

Re: Steering column bushes

Post by mk1 »

Screw is what you do with a lady if she's happy to play along, Bolt is what you do when her husband comes home.

M
Post Reply