Rosepetal alloys

Post any technical questions or queries here.
Post Reply
Steve A
998 Cooper
Posts: 275
Joined: Thu Aug 12, 2010 10:23 pm

Rosepetal alloys

Post by Steve A »

Anyone know what length wheelstuds i will need to fit the minispares rosepetals? Tyres? would yoko a32's be o.k. with these wheels as i have seen on another thread these tyres are best suited to wider rims the rosepetals being 4.75? if not which tyres (budget £55 per tyre max) for road and occasional 'mad un'. i only do around 2000 miles a year. Thanks again Steve.
guru_1071
1275 Cooper S
Posts: 2109
Joined: Thu Jun 24, 2010 7:47 pm

Re: Rosepetal alloys

Post by guru_1071 »

the std stud lengths will be fine as the nuts go right to the inside edge of the wheel
please note, these are my own, individual sales, nothing whatsoever to do with my employer, minispares
almondgreen
1275 Cooper S
Posts: 1036
Joined: Thu Jun 24, 2010 12:32 pm
Location: germany
Been thanked: 1 time

Re: Rosepetal alloys

Post by almondgreen »

A word about the tyres would interest me too....
guru_1071
1275 Cooper S
Posts: 2109
Joined: Thu Jun 24, 2010 7:47 pm

Re: Rosepetal alloys

Post by guru_1071 »

almondgreen wrote:A word about the tyres would interest me too....

id use a008's, they ballon out far better than a 32r on a thinner wheel.
please note, these are my own, individual sales, nothing whatsoever to do with my employer, minispares
Steve A
998 Cooper
Posts: 275
Joined: Thu Aug 12, 2010 10:23 pm

Re: Rosepetal alloys

Post by Steve A »

Thanks guru for the advice regards Steve
Post Reply