Mk2 Cooper wiring loom?

Post by **rolesyboy** » Wed Sep 09, 2015 8:41 pm

Any wise owls out there know if the wiring loom for a Mk2 Cooper should this be cotton braid or black PVC? Cheers. Mark

mk1 · Post by **mk1** » Thu Sep 10, 2015 9:51 am

Both are possible, but plastic wrapped is by far the most common.

M

Post by **rolesyboy** » Thu Sep 10, 2015 1:36 pm

Thanks Mark

Dr S · Post by **Dr S** » Thu Sep 10, 2015 2:21 pm

Interestingly enough my mk2 was half and half. The front was black plastic and the rear loom braided cloth. Pretty certain that was from the factory

mk1 · Post by **mk1** » Thu Sep 10, 2015 2:50 pm

The braided rear 1/2 seems to have gone on MUCH longer than the front.

M

Post by **rolesyboy** » Thu Sep 10, 2015 3:43 pm

Ditto that Dr S hence my question. Cheers

ferret · Post by **ferret** » Thu Sep 10, 2015 5:57 pm

Mine is also half and half as well

Post by **InimiaD** » Thu Sep 10, 2015 7:52 pm

My Dec 68 S has PVC front and braided rear.

Post by **Andrew1967** » Thu Sep 10, 2015 7:55 pm

So does my April 68 Mk2 998.

Post by **Simon776** » Thu Sep 10, 2015 11:58 pm

1970 Mk 3 S's still had braided rear looms.

mk1-forum.net