AEG521 conrod

Looking for that elusive part, shout about it here.
Posts are automatically deleted after 6 months.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
CooperTune
Posts: 1182
Joined: Sun Sep 22, 2013 1:47 pm
Location: Coastal VA USA

Re: AEG521 conrod

Post by CooperTune »

The ones with tape on I beam pressed apart to easy. They could be floated metal to metal or bushed. I would not reuse as press fit. Steve (CTR)
User avatar
TECH396
Posts: 372
Joined: Sun Feb 16, 2020 10:12 pm
Location: Vancouver Island BC Canada

Re: AEG521 conrod

Post by TECH396 »

I'm not sure if it's been mentioned here but the "slot" machined in two of the caps is part of the balancing process, and nothing to do with being a different rod. If you're replacing only one or two rods, they'll need to be rebalanced as a set.
Paul H.
Post Reply