LSD crown wheel

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
Posts: 600
Joined: Thu Sep 02, 2010 9:48 pm
Location: Dorset

LSD crown wheel

Post by davidnutland »

Would any body have a helical 3.4 crown wheel suitable for a Quaife/LSD type
Posts: 2535
Joined: Sat May 24, 2014 7:12 am

Re: LSD crown wheel

Post by 360gts »

I have a couple of NOS Leyland 3.44 here.....postage from Canada...might be a tad high. They were for the Salisbury LSD....but they can be used on other units with a slight mod.
Posts: 518
Joined: Thu Jun 24, 2010 5:21 pm
Location: Hampshire

Re: LSD crown wheel

Post by 5portsrock »

Hi David. I have a new jack knight 3.44 to 1 cwp, superfinished in my lockup. Unsure if it's helical or straight cut? I should be able to get there on Monday and get some pics. Fraser
Post Reply