Alexander 7 port head
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
-
babybertha
- Posts: 1
- Joined: Tue May 23, 2023 10:37 am
Alexander 7 port head
Hello,first post,im looking for parts for an Alexander 7 port head,mainly rockers and shaft at mo,but anything considered,thank you.
-
mk1
- Site Admin
- Posts: 19443
- Joined: Thu Jun 24, 2010 11:30 am
- Location: York-ish
- Contact:
Re: Alexander 7 port head
If anyone is ever looking for parts for an Alex 7 port, it is the rockers & a rocker shaft. These often go walkies over the years.
In the past I have had batches of both re made, but I haven't done so for a long time now. I have just sold my last head, so am unlikely to do any in the future either.
If it's any help, & if you don't have them already I have all the drawings for the ancillaries for the Alex 7 port & can send you copies if needs be.
M
In the past I have had batches of both re made, but I haven't done so for a long time now. I have just sold my last head, so am unlikely to do any in the future either.
If it's any help, & if you don't have them already I have all the drawings for the ancillaries for the Alex 7 port & can send you copies if needs be.
M