Looking for a good standard thin flange 998cc block. Would be a bonus to also have a std/std crank and rods with it.
Additionally, I am also looking for a set of late hydrolastic rear struts 21A1805 in undamaged/unmodified condition. These should be 245mm in length.
Also looking for a SN4479/37 speedo, which is black faced Mk I speedo that goes to 140kph dead.
Can collect from Beaulieu.
Std 998cc Thin Flange Block, Hydrolastic Struts, and SN4479/37 Speedo
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
-
Mini4Ever
- Posts: 643
- Joined: Fri Jun 25, 2010 7:46 pm
- Location: Netherlands
-
Andrew1967
- Posts: 7587
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
Re: Std 998cc Thin Flange Block, Hydrolastic Struts, and SN4479/37 Speedo
Bart, I may have a pair of replated struts available .. will dig them out to measure and let you know.
Will be at Beaulieu
Will be at Beaulieu
-
Striped shirt
- Posts: 56
- Joined: Tue May 31, 2022 12:33 am
-
Striped shirt
- Posts: 56
- Joined: Tue May 31, 2022 12:33 am
Re: Std 998cc Thin Flange Block, Hydrolastic Struts, and SN4479/37 Speedo
Hello.
Did reply to your message, but the reply is still sitting in the 'outbox'. No idea why.
Did reply to your message, but the reply is still sitting in the 'outbox'. No idea why.
-
Alex
- Posts: 576
- Joined: Wed Sep 09, 2015 11:22 pm
- Location: Zummerzet
- Contact:
Re: Std 998cc Thin Flange Block, Hydrolastic Struts, and SN4479/37 Speedo
Full inbox probably.
I'll have a look in the garage, I think I've got a 998 Cooper block sat in a corner.
I'll have a look in the garage, I think I've got a 998 Cooper block sat in a corner.
Metric is for people who can't do fractions.
-
Mini4Ever
- Posts: 643
- Joined: Fri Jun 25, 2010 7:46 pm
- Location: Netherlands
Re: Std 998cc Thin Flange Block, Hydrolastic Struts, and SN4479/37 Speedo
Thanks for all the responses on the block: have a few options now 
Too many cars...