cooper s aeg312 1275 block wanted

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
Posts: 271
Joined: Wed Jan 15, 2014 8:40 pm
Location: somerset

cooper s aeg312 1275 block wanted

Post by Pedromintor »

cooper s aeg312 1275 block wanted
dont mind if it needs liners fitting or needs a re bore
please pm me if u have one

Posts: 130
Joined: Mon Feb 18, 2019 12:50 am
Location: California, USA

Re: cooper s aeg312 1275 block wanted

Post by mnicoop63 »

I've got this one but I am in the United States. I belive its already .020 over and will need a rebore. It's been a long time since Ive looked at it. It's all shiney from being sprayed down with WD40 to prevent rust.

You do not have the required permissions to view the files attached to this post.
Posts: 231
Joined: Sun Mar 11, 2012 10:50 am

Re: cooper s aeg312 1275 block wanted

Post by e-type »

I do have a nice one, thin flange from 1965, It is ready to use, chemically cleaned, new liners back to std. bore, new cam bearings, new core plugs, 1275 tag at the back.
Post Reply