22G1128 gearbox

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
Minisprinter
Posts: 286
Joined: Sun May 27, 2018 7:32 am
Location: Essex (not the white stiletto bit)

22G1128 gearbox

Post by Minisprinter »

I'm looking for the above, it hasn't got to be spectacular but at least all the gear selector parts there, I'm going to do a magic wand conversion so the tail housing style isn't that important ( ADO16 type ok) preferably within 100 miles of Central Essex.

MS
User avatar
pdb
Posts: 199
Joined: Sat Jan 11, 2014 11:18 pm
Location: Ringsted, Denmark

Re: 22G1128 gearbox

Post by pdb »

Not even close to a 100 miles from you, however I have a NOS ADO16 1128 gearbox. Not a Gold Seal, but brand new.
Location: Denmark :D
rolesyboy
Posts: 2029
Joined: Fri Jun 25, 2010 10:57 am
Location: Colchester, Essex

Re: 22G1128 gearbox

Post by rolesyboy »

Hi, I have a couple of 1128 boxes available. They are still on the ADO16 engines though.
I am in Essex. It must be Christmas :lol: (Colchester)
Rolesyboy
Alex
Posts: 541
Joined: Wed Sep 09, 2015 11:22 pm
Location: Zummerzet
Contact:

Re: 22G1128 gearbox

Post by Alex »

I've got an 1128 magic wand box under a Goldseal 998 engine that I'm about to list for sale - would that be of any use ?
Metric is for people who can't do fractions.
User avatar
Andrew1967
Posts: 7429
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: 22G1128 gearbox

Post by Andrew1967 »

I think I have one .. complete as removed years ago. Will check tomorrow if interested.

In Norfolk, NR29
251 ENG
Posts: 1496
Joined: Sun Jun 27, 2010 5:26 pm

Re: 22G1128 gearbox

Post by 251 ENG »

Hello

I have a 22G 1128 case which has been fitted with a 3 syncro magic wand diff housing . It's a much better change than the 4 syncro one with the steel plate on the bottom .
It has been correctly line bored and dif cover faces remachined

Email me on orx77@yahoo.co.uk
Minisprinter
Posts: 286
Joined: Sun May 27, 2018 7:32 am
Location: Essex (not the white stiletto bit)

Re: 22G1128 gearbox

Post by Minisprinter »

Thanks for all the replies guys, hopefully I've sent messages to people within range etc, it is just a gearbox I need as the engine is away being machined at the moment.

MS
coop12g295
Posts: 702
Joined: Thu Jun 24, 2010 4:31 pm
Location: Portsmouth Hants

Re: 22G1128 gearbox

Post by coop12g295 »

I have converted my 1128 box to go in the van I'm guessing an ADO16 box can't be converted unless you change the diff housing. Willing to be educated
Minisprinter
Posts: 286
Joined: Sun May 27, 2018 7:32 am
Location: Essex (not the white stiletto bit)

Re: 22G1128 gearbox

Post by Minisprinter »

Just to let everybody know, I've picked a box up from Andrew1967, thanks for all the offers

MS
User avatar
Andrew1967
Posts: 7429
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: 22G1128 gearbox

Post by Andrew1967 »

Nice to meet you Steve and have a chat. :D

Good to see the gearbox going to be potentially put to good use :)
Post Reply