Steering Wheel Boss

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
Spitz
Posts: 583
Joined: Thu Jun 24, 2010 5:37 pm
Location: Saskatchewan, CA

Steering Wheel Boss

Post by Spitz »

Looking for a boss
IMG_20221106_145524_(600_x_600_pixel).jpg
IMG_20221106_145554_(600_x_600_pixel).jpg
for this wheel.
Pref with a Morris horn push
You do not have the required permissions to view the files attached to this post.
User avatar
UHR850
Posts: 5968
Joined: Thu Jun 24, 2010 3:26 pm
Location: Huizen the Netherlands

Re: Steering Wheel Boss

Post by UHR850 »

Well finding an original LL Monte boss is like a needle in a haystack. You have two options, buying a replica from Nippycars or use a Astrali 1A boss. The Astrali boss mk1 will do the job nicely but the six holes are not 100% in line.
If you adjust the holes in the boss slightly you will have a perfect setup.

Very nice steeringwheel by the way.

Kees.
You do not have the required permissions to view the files attached to this post.
DOWNTON Mini is what I like a lot.
Collecting 60th wooden steeringwheels.
Fanfaniracing
Posts: 1116
Joined: Sun Feb 19, 2012 12:11 pm
Location: Somewhere west Switzerland...

Re: Steering Wheel Boss

Post by Fanfaniracing »

I have this Astrali Boss for Sale...
72E66002-0B17-4B80-BE54-38B7FBA98D4D.jpeg
3106A77B-D736-4A0E-A736-55BBA37F5513.jpeg
You do not have the required permissions to view the files attached to this post.
I promise i won't buy another MkI...
Spitz
Posts: 583
Joined: Thu Jun 24, 2010 5:37 pm
Location: Saskatchewan, CA

Re: Steering Wheel Boss

Post by Spitz »

Would this fit my wheel? What is the measurement between holes.

edit: Astrali....so the same as the pictured one above......holes are slightly off
User avatar
UHR850
Posts: 5968
Joined: Thu Jun 24, 2010 3:26 pm
Location: Huizen the Netherlands

Re: Steering Wheel Boss

Post by UHR850 »

Yes it will fit your steering wheel, on my pictures you see how the holes are on an 1A Astrali boss.
If you adjust the holes of the boss a bit you have a perfect fit, you don't need the ring.

Don't adjust the holes on your steering wheel please :roll:

Kees.
DOWNTON Mini is what I like a lot.
Collecting 60th wooden steeringwheels.
Post Reply