for my MK1 I look for a bood lid liner like, where do I found this ?
Cheers
Wesley
Boot lid liner
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
-
WesleyB
- Posts: 208
- Joined: Mon Oct 28, 2019 4:18 pm
- Location: Gent - Belgium
- Contact:
Boot lid liner
Hi,
for my MK1 I look for a bood lid liner like, where do I found this ?
Cheers
Wesley
for my MK1 I look for a bood lid liner like, where do I found this ?
Cheers
Wesley
MK1 Austin Cooper 998cc 1967 Smoke Grey
http://mk1-forum.net/viewtopic.php?f=6&t=26813
http://mk1-forum.net/viewtopic.php?f=6&t=26813
-
surfblue63
- Posts: 6142
- Joined: Wed Jan 12, 2011 9:13 pm
- Location: NE England
Re: Boot lid liner
Newton Commercial make repro versions in Hardura.
https://newtoncomm.co.uk/collections/sa ... ck-hardura
To attach it to the boot lid you need some of these clips that go into the 4 holes in the top boot rail.
https://www.bresco.com/acatalog/Metal-p ... tml#SID=24
.
https://newtoncomm.co.uk/collections/sa ... ck-hardura
To attach it to the boot lid you need some of these clips that go into the 4 holes in the top boot rail.
https://www.bresco.com/acatalog/Metal-p ... tml#SID=24
.
-
WesleyB
- Posts: 208
- Joined: Mon Oct 28, 2019 4:18 pm
- Location: Gent - Belgium
- Contact:
Re: Boot lid liner
Thanks for the suggestion.
Is there also a other option for only the boot ?
Like you see on some works minis ?
Cheers
Wesley
Is there also a other option for only the boot ?
Like you see on some works minis ?
Cheers
Wesley
MK1 Austin Cooper 998cc 1967 Smoke Grey
http://mk1-forum.net/viewtopic.php?f=6&t=26813
http://mk1-forum.net/viewtopic.php?f=6&t=26813
-
'S'-type
- Posts: 297
- Joined: Fri Nov 01, 2013 10:59 pm
- Location: Buckinghamshire
-
WesleyB
- Posts: 208
- Joined: Mon Oct 28, 2019 4:18 pm
- Location: Gent - Belgium
- Contact:
Re: Boot lid liner
Yes. That’s more the type I like
MK1 Austin Cooper 998cc 1967 Smoke Grey
http://mk1-forum.net/viewtopic.php?f=6&t=26813
http://mk1-forum.net/viewtopic.php?f=6&t=26813
-
1071 S
- Posts: 807
- Joined: Sun Jun 27, 2010 8:44 am
- Location: Southern Tablelands (Oz)
Re: Boot lid liner
The “Minispares” type shown was used with a boot board in the Cooper and S whereas the “Newton” style was for standard early Minis and wraps over the boot floor and lid..
Wesleys photo shows a boot board but a non Cooper bootlid that will need extra mounting holes drilled in it...
Cheers, Ian
Wesleys photo shows a boot board but a non Cooper bootlid that will need extra mounting holes drilled in it...
Cheers, Ian