gear box parts for 1800 gear box

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
roger mcnab
Posts: 382
Joined: Mon Feb 08, 2016 10:19 am

gear box parts for 1800 gear box

Post by roger mcnab »

hi i am having some difficulty in finding a collar part no 22h767 also slip joint boots 2 off part no 18g9029 mini ones are to small
cheers roger mcnab
User avatar
Andrew1967
Posts: 6908
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: gear box parts for 1800 gear box

Post by Andrew1967 »

Roger, I’ll ask Dad as he has some Landcrab parts.

An Autojumbler friend had some a while back, I’ll ask him as well for the shaft gaiter.

So you have a photo of the collar ?
User avatar
Andrew1967
Posts: 6908
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: gear box parts for 1800 gear box

Post by Andrew1967 »

Hi Roger,

Found this NOS gaiter ... will ask my autojumble friend if he still has his.

Will also look up that collar and see if we can help.
You do not have the required permissions to view the files attached to this post.
User avatar
Andrew1967
Posts: 6908
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: gear box parts for 1800 gear box

Post by Andrew1967 »

No luck with that collar I’m afraid.

Might be worth talking to Tony Wood, the parts contact for the Landcrab club .
roger mcnab
Posts: 382
Joined: Mon Feb 08, 2016 10:19 am

Re: gear box parts for 1800 gear box

Post by roger mcnab »

hi well that boot looks great as i am in australia how do we go from here i use paypal
postage is not that expensive i will wait to here from you cheers roger :D
User avatar
Andrew1967
Posts: 6908
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: gear box parts for 1800 gear box

Post by Andrew1967 »

Hi Roger,

Paypal is fine.

Would a good used original be of interest ? If it is, I'll have a look in the shed at Dads Landcrab used spares.

Regards

Andrew
roger mcnab
Posts: 382
Joined: Mon Feb 08, 2016 10:19 am

Re: gear box parts for 1800 gear box

Post by roger mcnab »

hi andrew
any parts will be fine i have a pair of old ones and i mean old newer ones would be better but what ever i can get is fine
i have a collar c
located and also have a new one lurking in the shed also think one came with the spare box i bought also got one with one end shorter which will worh as the gear slides over it holding it in position but i like things to be good and with the v8 going through the box will be interesting
cheers roger
User avatar
Andrew1967
Posts: 6908
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: gear box parts for 1800 gear box

Post by Andrew1967 »

I'll have a look at the weekend and let you know if I find anything.
Jason
Posts: 24
Joined: Fri Nov 26, 2021 11:45 am
Location: Stoke on Trent

Re: gear box parts for 1800 gear box

Post by Jason »

Little bit away from the original subject, but is this Churchill socket for the hub balljoints of interest?
You do not have the required permissions to view the files attached to this post.
roger mcnab
Posts: 382
Joined: Mon Feb 08, 2016 10:19 am

Re: gear box parts for 1800 gear box

Post by roger mcnab »

hi jason
well the project is installing a rover v8 engine and 1800 gearbox into a mini clubman with cut and welded drive shafts with the 1800 auto inner hardy spicer steel joints with mini outer shaft end and mini outer cv joints and hubs
but thank you for the kind offer but i have enough tools to nearly build a bridge :lol:
cheers roger
Post Reply