Kangol - 1x small plastic webbing retainer / clip part

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
Posts: 38
Joined: Sun Mar 02, 2014 1:53 pm
Location: West London, UK

Kangol - 1x small plastic webbing retainer / clip part

Post by timcee »

Wanted - one off the small black plastic (nylon?) part which fits onto the hook of the Kangol magnetic type seatbelts buckle. This type of belt was fitted by BMC in mid 1960s.

This part sort of fixes the hook part of the buckle in a particular position on the webbing. It stops the webbing running freely through the slot in the hook part but allows it to be repositioned as necessary.

An original item would be great but a 3D printed version would be fine too.

Many thanks.

Unipower GT #1
Posts: 622
Joined: Mon Feb 03, 2014 3:33 pm
Location: Bracknell Berkshire

Re: Kangol - 1x small plastic webbing retainer / clip part

Post by rpb203 »

Hello Tim,
I think I know the part you mean but don't have a picture you could post by any chance?
Post Reply