Inlet valves AEG163 head

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
minime
Posts: 6
Joined: Mon Aug 02, 2021 1:13 am
Location: Napier - New Zealand

Inlet valves AEG163 head

Post by minime »

Hi all
Does anybody have 4 inlet valves to suit an AEG 163 head ?
1.401"x 3.52"long , used valves ok as long as they are straight and can be dressed.
Thanks
User avatar
mk1
Site Admin
Posts: 16942
Joined: Thu Jun 24, 2010 11:30 am
Location: York-ish
Contact:

Re: Inlet valves AEG163 head

Post by mk1 »

I may do/. I'll have a look. But New ones are available from the usual suspects.
Mark F
General dogsbody.
minime
Posts: 6
Joined: Mon Aug 02, 2021 1:13 am
Location: Napier - New Zealand

Re: Inlet valves AEG163 head

Post by minime »

Thank you Mark. :D
minime
Posts: 6
Joined: Mon Aug 02, 2021 1:13 am
Location: Napier - New Zealand

Re: Inlet valves AEG163 head

Post by minime »

Up date on inlet valves, I've bitten to bullet and ordered new valves , only because I had the AEG163 head crack tested and it came back with a clean bill of health . :D :)
Post Reply