Suspension Trumpets 21A 1032

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
richardACS
Posts: 383
Joined: Tue Jun 19, 2018 2:43 pm
Location: Hertfordshire

Suspension Trumpets 21A 1032

Post by richardACS »

Would like to purchase for 1071
Top
NicholasUpton
Posts: 261
Joined: Wed Nov 14, 2012 5:02 pm
Location: Woodland, California USA
Contact:
Contact NicholasUpton

Re: Suspension Trumpets 21A 1032

Post by NicholasUpton »

I cant seem to find this number in my parts book? do you have dimensions, or other way to identify?
Top
360gts
Posts: 2494
Joined: Sat May 24, 2014 7:12 am

Re: Suspension Trumpets 21A 1032

Post by 360gts »

21A1032 is cast on the trumpet near the larger flange. They are larger in diameter (where they contact the rubber) than standard trumpets.
AKD shows this information on page MH3
Last edited by 360gts on Sat Feb 04, 2023 4:51 pm, edited 1 time in total.
Top
tedmcedd
Posts: 854
Joined: Thu Jul 01, 2010 5:08 pm
Location: West Yorkshire

Re: Suspension Trumpets 21A 1032

Post by tedmcedd »

Anyone know the diameter? I have a load but can't see any numbers, but can measure them up.
Top
1071bob
Posts: 504
Joined: Thu Jun 24, 2010 8:51 pm
Location: west country

Re: Suspension Trumpets 21A 1032

Post by 1071bob »

You'll struggle to find any decent ones from the UK, I have some but too corroded to be of use. The best option is the later 21A 1684 fitted to later cars, these have the same wider flange.
You do not have the required permissions to view the files attached to this post.
Top
NicholasUpton
Posts: 261
Joined: Wed Nov 14, 2012 5:02 pm
Location: Woodland, California USA
Contact:
Contact NicholasUpton

Re: Suspension Trumpets 21A 1032

Post by NicholasUpton »

1071bob wrote: ↑Sat Feb 04, 2023 5:34 pm You'll struggle to find any decent ones from the UK, I have some but too corroded to be of use. The best option is the later 21A 1684 fitted to later cars, these have the same wider flange.
Thanks bob, I have slowly been sorting and organize my used parts, and currently have a few tubs of stock trumpets, time to start jet washing and sorting them out.
Top
Post Reply

Return to “Wanted”