HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
richardACS
998 Cooper
Posts: 722
Joined: Tue Jun 19, 2018 2:43 pm
Location: Hertfordshire
Has thanked: 42 times
Been thanked: 10 times

Re: HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

Post by richardACS »

mk1 wrote: Mon Nov 20, 2023 8:05 am Close but no cigar. They are too big :(

These are about 40mm we need 36mm ID.

M
Could the 32mm work with an intermediate rubber sleeve?
SMOKE GREY
1275 Cooper S
Posts: 1561
Joined: Thu Jun 24, 2010 7:31 pm
Location: Sunny Lancashire
Been thanked: 10 times

Re: HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

Post by SMOKE GREY »

mk1 wrote: Mon Nov 20, 2023 8:05 am Close but no cigar. They are too big :(

These are about 40mm we need 36mm ID.

M
😳☹️
User avatar
Exminiman
1275 Cooper S
Posts: 3102
Joined: Tue Jan 17, 2017 7:59 am
Location: Berkshire UK
Has thanked: 58 times
Been thanked: 56 times

Re: HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

Post by Exminiman »

32mm https://www.ebay.co.uk/itm/134494134636

Presume this means they are made new and this is not NOS ?

Might also mean there is actually a Porsche (Beetle) one....is this the part number 113819723A ?

That is if it does actually fit :lol:
User avatar
Exminiman
1275 Cooper S
Posts: 3102
Joined: Tue Jan 17, 2017 7:59 am
Location: Berkshire UK
Has thanked: 58 times
Been thanked: 56 times

Re: HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

Post by Exminiman »

EDIT bought this from the eBay link above, 32mm internal diameter

Here you go, just tried it out looks a little different but nice interference fit and same material

The key seems to be the VAG part number, just google it….113819723A

Have put an original one next to it for comparison
.
.
IMG_0494.jpeg
You do not have the required permissions to view the files attached to this post.
mk1
Site Admin
Posts: 19835
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 3 times
Been thanked: 10 times

Re: HOSE-CARD/FOIL- HEATER TO DEMISTER DUCT

Post by mk1 »

That looks OK.

M
Post Reply