Binnacle switch

Aginley · Post by **Aginley** » Sat Nov 24, 2018 2:22 pm

Hi, what type of switch do I need for under the binnacle and also what wiring or type of bulb holders are needed to lite the speedo up?
Just received my binnacle from nippy cars and carnt tell you how good they are! Amazing reproduction quality. Top marks..

Aginley · Post by **Aginley** » Thu Dec 13, 2018 8:14 pm

Anyone got a picture of the correct switch?
Thanks

Post by **steve1071** » Thu Dec 13, 2018 10:43 pm

Autosparks do the metal clip in bulb holders if you want new or I will have some kicking about.

eBay item 123522975584 shows a switch.

Post by **steve1071** » Fri Dec 14, 2018 12:59 pm

Here's a link that should work

https://www.ebay.co.uk/itm/Classic-Mini ... 7675.l2557

Aginley · Post by **Aginley** » Fri Dec 14, 2018 1:25 pm

‘Thanks Steve !

johnv · Post by **johnv** » Sat Dec 15, 2018 5:33 am

Let me know if you find a source, thanks

Post by **111Robin** » Sat Dec 15, 2018 12:15 pm

viewtopic.php?f=5&t=22964&hilit=Switch&start=10

Lucas part number 5L31. Also used on the ADO16 and probably other BMC models.

Aginley · Post by **Aginley** » Sat Dec 15, 2018 5:55 pm

Found something the same from somerford

Post by **iain1967s** » Sat Dec 15, 2018 6:18 pm

Early single dial speedo has a square toggle each side - they are hard to find now. My Mk1 S oval dash has a more rounded toggle. Whereas BCA4312 is a flat toggle, more like the windscreen wiper switch.

I think, from left to right, the part numbers are: 13H303, 5L31, BCA4312

mk1-forum.net

Binnacle switch

Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch

Re: Binnacle switch