I know this isn't a mk1 part, but I know a lot of people occasionally deal with later stuff too.
I'm on the lookout for a 1275 a plus manual block and caps, preferably unlinered and as minimum an overbore as possible.
I'm in Bristol.
Cheers
Simon
1275 A plus Block and Caps
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
-
sclemow
- Posts: 314
- Joined: Thu Jun 24, 2010 1:02 pm
- Location: Bristol, UK
-
251 ENG
- Posts: 1222
- Joined: Sun Jun 27, 2010 5:26 pm
Re: 1275 A plus Block and Caps
Hello
Did you find a block ?
Did you find a block ?
-
sclemow
- Posts: 314
- Joined: Thu Jun 24, 2010 1:02 pm
- Location: Bristol, UK
Re: 1275 A plus Block and Caps
Hi
I haven't yet.
It's worth saying I'm intending on boring it to +60 or possibly +73.5 depending in what I get hold of.
Cheers
Simon
I haven't yet.
It's worth saying I'm intending on boring it to +60 or possibly +73.5 depending in what I get hold of.
Cheers
Simon
-
Alex
- Posts: 437
- Joined: Wed Sep 09, 2015 11:22 pm
- Location: Zummerzet
- Contact:
Re: 1275 A plus Block and Caps
Not having parted with a block in five years, what's a ballpark figure for one these days ?
Metric is for people who can't do fractions.
-
imack
- Posts: 269
- Joined: Wed Oct 25, 2017 9:06 pm
- Location: Kent
Re: 1275 A plus Block and Caps
I paid about £150 for a nice clean 1275 solid centre main casting, standard bore late A series block and caps last year from a forum member.
-
sclemow
- Posts: 314
- Joined: Thu Jun 24, 2010 1:02 pm
- Location: Bristol, UK
Re: 1275 A plus Block and Caps
£150 is what I sold my last A plus block for last year. (Not realising I would need one now!)