Hi all, i'm looking for an Arden Head, cams and exhaust.
PM me if you have somehing to offer.
thanks
Olivier
Arden Head
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Rev 1.2 (16.09.20)
-
251 ENG
- Posts: 1160
- Joined: Sun Jun 27, 2010 5:26 pm
Re: Arden Head
Just buy a new head , much beter than a 50+ year old one that's had a very hard life
-
Fanfaniracing
- Posts: 659
- Joined: Sun Feb 19, 2012 12:11 pm
- Location: Somewhere west Switzerland where the fondue is melting very well...
Re: Arden Head
I bought one from Minispares and i sm happy with it.
The first used one i was looking at was almost the same price, the valves were all gone, almost no combustion chambers anymore, welded everywhere and bent in all directions.
Better to buy a new one and start with a blank sheet of paper...
The first used one i was looking at was almost the same price, the valves were all gone, almost no combustion chambers anymore, welded everywhere and bent in all directions.
Better to buy a new one and start with a blank sheet of paper...
-
mk1
- Site Admin
- Posts: 15809
- Joined: Thu Jun 24, 2010 11:30 am
- Location: York-ish
- Contact:
Re: Arden Head
I have an unused Minispares one that I may consider selling.
Mark F
General dogsbody.
General dogsbody.