Front subframe brake unions

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
GraemeC
Posts: 1647
Joined: Thu Jun 24, 2010 1:05 pm
Location: Hiding From The Dog... NW Eng

Re: Front subframe brake unions

Post by GraemeC »

I have one - £8 posted?
User avatar
johnv
Posts: 642
Joined: Sun Dec 18, 2016 1:01 pm
Location: Surrey UK

Re: Front subframe brake unions

Post by johnv »

Yes please Graeme I'll ping dosh across
Mk2 Cooper
Mk1 Cooper project
Mk3 Cooper S
User avatar
Andrew1967
Posts: 6104
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: Front subframe brake unions

Post by Andrew1967 »

Glad Graeme has sorted you John, as I found every brass union except ....
GraemeC
Posts: 1647
Joined: Thu Jun 24, 2010 1:05 pm
Location: Hiding From The Dog... NW Eng

Re: Front subframe brake unions

Post by GraemeC »

Will be in the post today
User avatar
johnv
Posts: 642
Joined: Sun Dec 18, 2016 1:01 pm
Location: Surrey UK

Re: Front subframe brake unions

Post by johnv »

thanks Graeme, faster than somerford with the new bits!
Mk2 Cooper
Mk1 Cooper project
Mk3 Cooper S
CooperTune
Posts: 854
Joined: Sun Sep 22, 2013 1:47 pm
Location: Coastal VA USA

Re: Front subframe brake unions

Post by CooperTune »

Just wondering, I have quite a few of the brass fitting for a front sub. Some are straight in and out with the banjo bolt hole. Some have an angle from in to out. Any ideas when and why the change? Steve (CTR)
Post Reply