Standard S forged rocker set up

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
big-un1967
Posts: 274
Joined: Mon Sep 13, 2010 9:05 pm

Standard S forged rocker set up

Post by big-un1967 »

Ideally NOS, however if you have a ready to fit set up that would do!
I have some 1.5 but want to reduce wear on the valve gear
Regards
Paulstanworth@hotmail.co.uk

big-un1967
Posts: 274
Joined: Mon Sep 13, 2010 9:05 pm

Re: Standard S forged rocker set up OR 2-off 22G426

Post by big-un1967 »

I can make up a set needing 2 off 22G426

big-un1967
Posts: 274
Joined: Mon Sep 13, 2010 9:05 pm

Re: Standard S forged rocker set up

Post by big-un1967 »

I mean AEG426

Post Reply