1275 crankshaft

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

Rev 1.1 (27.07.15)
Post Reply
jac.pt
Posts: 128
Joined: Tue Sep 30, 2014 9:18 pm

1275 crankshaft

Post by jac.pt »

Hi,
I’m looking for a non S 1275 crankshaft, preferably in std/std sizes.
Thanks
Last edited by jac.pt on Sun Jul 26, 2020 11:32 pm, edited 1 time in total.

jac.pt
Posts: 128
Joined: Tue Sep 30, 2014 9:18 pm

Re: 1275 crankshaft

Post by jac.pt »

Still looking

CooperTune
Posts: 794
Joined: Sun Sep 22, 2013 1:47 pm
Location: Coastal VA USA

Re: 1275 crankshaft

Post by CooperTune »

Can't help but wonder why you don't just pick up the phone and order a new one. I buy new ones 3 or 4 at a time and always run out. Steve (CTR)

Alex
Posts: 377
Joined: Wed Sep 09, 2015 11:22 pm

Re: 1275 crankshaft

Post by Alex »

I think you may struggle at std/std but if you consider 10/10 it'll be a lot easier.

jac.pt
Posts: 128
Joined: Tue Sep 30, 2014 9:18 pm

Re: 1275 crankshaft

Post by jac.pt »

CooperTune wrote:
Sat Jul 25, 2020 2:33 pm
Can't help but wonder why you don't just pick up the phone and order a new one. I buy new ones 3 or 4 at a time and always run out. Steve (CTR)
Thanks to your suggestion, but to modiffy the stroke and profile of a crank, I don’t need a new one! :roll:

mnicoop63
Posts: 57
Joined: Mon Feb 18, 2019 12:50 am

Re: 1275 crankshaft

Post by mnicoop63 »

I have a 12G1505A crankshaft that is still standard. Came out of an Austin America with automatic transmission. Located in California.

Brian

jac.pt
Posts: 128
Joined: Tue Sep 30, 2014 9:18 pm

Re: 1275 crankshaft

Post by jac.pt »

mnicoop63 wrote:
Mon Jul 27, 2020 7:57 am
I have a 12G1505A crankshaft that is still standard. Came out of an Austin America with automatic transmission. Located in California.

Brian
Many thanks to your offer Brian, but I think that the shipping costs and taxes woud be more than a new crank...

Best regards.

mnicoop63
Posts: 57
Joined: Mon Feb 18, 2019 12:50 am

Re: 1275 crankshaft

Post by mnicoop63 »

jac.pt wrote:
Mon Jul 27, 2020 1:04 pm
mnicoop63 wrote:
Mon Jul 27, 2020 7:57 am
I have a 12G1505A crankshaft that is still standard. Came out of an Austin America with automatic transmission. Located in California.

Brian
Many thanks to your offer Brian, but I think that the shipping costs and taxes woud be more than a new crank...

Best regards.
I wasn't sure where you are and didn't see anything on your profile so figured I would post it. For all I knew you could haver been right down the road. Good luck with your search.

GraemeC
Posts: 1418
Joined: Thu Jun 24, 2010 1:05 pm
Location: Hiding From The Dog... NW Eng

Re: 1275 crankshaft

Post by GraemeC »

jac.pt wrote:
Mon Jul 27, 2020 1:04 pm
mnicoop63 wrote:
Mon Jul 27, 2020 7:57 am
I have a 12G1505A crankshaft that is still standard. Came out of an Austin America with automatic transmission. Located in California.

Brian
Many thanks to your offer Brian, but I think that the shipping costs and taxes woud be more than a new crank...

Best regards.
Where are you?

jac.pt
Posts: 128
Joined: Tue Sep 30, 2014 9:18 pm

Re: 1275 crankshaft

Post by jac.pt »

GraemeC wrote:
Tue Jul 28, 2020 9:22 am
jac.pt wrote:
Mon Jul 27, 2020 1:04 pm
mnicoop63 wrote:
Mon Jul 27, 2020 7:57 am
I have a 12G1505A crankshaft that is still standard. Came out of an Austin America with automatic transmission. Located in California.

Brian
Many thanks to your offer Brian, but I think that the shipping costs and taxes woud be more than a new crank...

Best regards.
Where are you?
Pm sent.

Still looking for a 1275 crankshaft.

Thanks.

Post Reply