Wanted: MK1 850 camshaft, very good

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

Rev 1.1 (27.07.15)
User avatar
moita
Posts: 231
Joined: Sun Oct 16, 2011 3:45 pm
Location: Portugal

Wanted: MK1 850 camshaft, very good

Post by moita »

Hi,

Willing to buy a very good mini mk1 850 cam in very good condition !

Thank you.

User avatar
moita
Posts: 231
Joined: Sun Oct 16, 2011 3:45 pm
Location: Portugal

Re: Wanted: MK1 850 camshaft, very good

Post by moita »

Still looking :) thank you

CooperTune
Posts: 794
Joined: Sun Sep 22, 2013 1:47 pm
Location: Coastal VA USA

Re: Wanted: MK1 850 camshaft, very good

Post by CooperTune »

I'm sure I have one from an early Mk1 didn't pay much attention when it came out. I'll have to figure how to identify it as I may have 50 cam cores. Over 100 degrees in the shop all the time now. I'll look when cooling spell hits. Steve (CTR)

User avatar
moita
Posts: 231
Joined: Sun Oct 16, 2011 3:45 pm
Location: Portugal

Re: Wanted: MK1 850 camshaft, very good

Post by moita »

Many thanks for reply, let me know please :)

Cheers!!

NM

mnicoop63
Posts: 57
Joined: Mon Feb 18, 2019 12:50 am

Re: Wanted: MK1 850 camshaft, very good

Post by mnicoop63 »

I also have a couple early 850 camshafts. if memory serves me correctly they both have lobes in great condition. I believe one has wear on end near oil pump. The other is pretty clean. Haven't looked at them in a long time.

Brian

User avatar
moita
Posts: 231
Joined: Sun Oct 16, 2011 3:45 pm
Location: Portugal

Re: Wanted: MK1 850 camshaft, very good

Post by moita »

Hi Brian,

If you be kind and want to sell let me know.

Cheers!

mnicoop63
Posts: 57
Joined: Mon Feb 18, 2019 12:50 am

Re: Wanted: MK1 850 camshaft, very good

Post by mnicoop63 »

moita wrote:
Mon Jul 27, 2020 10:34 am
Hi Brian,

If you be kind and want to sell let me know.

Cheers!
I will try and find them in the next few days and send some pictures to you. I am in the United States so not sure how much shipping them would be if you decide you want one or both of them.

Brian

mnicoop63
Posts: 57
Joined: Mon Feb 18, 2019 12:50 am

Re: Wanted: MK1 850 camshaft, very good

Post by mnicoop63 »

Here is a picture of one of the cams. I will send you a link to more pictures of them when I upload them to OneDrive. They look dirty but I think are stained or something. I dont know, it doesn't rub off. In all honesty I don't know what they are worth if anything at all. I am disappointed they have some black spots that look like grease but like I said doesn't rub off. I might just consider mailing them to you if you pay for shipping and then if you think one of them is usable you can send me payment for it. I just don't want to sell something to you that isn't usable. I am not out to make a bunch of money. I would just like to see one of them used again. One of the cams is worn on the oil pump end and I am not sure it's usable.
You do not have the required permissions to view the files attached to this post.

User avatar
Peter1071
Posts: 111
Joined: Fri Nov 11, 2011 10:40 pm
Location: UK

Re: Wanted: MK1 850 camshaft, very good

Post by Peter1071 »

I have a used ,but useable, cam you can have for the cost of postage if you are still looking?

Peter

User avatar
Mini4Ever
Posts: 605
Joined: Fri Jun 25, 2010 7:46 pm
Location: Netherlands

Re: Wanted: MK1 850 camshaft, very good

Post by Mini4Ever »

I have a NOS 850 cam 8G712 for sale
1964 Austin Cooper S 1275
1965 Volvo Amazon Combi
1965 Austin Cooper 998
1967 Morris Minor 1000
1967 Austin Cooper 998 Mk II
1969 Austin Cooper S 1275
1972 Austin 1300GT
1975 Mini Jubilee
1978 Mini 1000

Post Reply