Wanted - measurement from Mini Pickup

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
jayare
Posts: 132
Joined: Sat Oct 31, 2015 11:23 pm
Location: Buckinghamshire

Wanted - measurement from Mini Pickup

Post by jayare »

Hi all,

I'm after a measurement from a Mini Pickup - the previous owner who restored the car didn't fit the sockets for the centre hoop of the tilt frame when they fitted new rear quarter panels. I have the new sockets ready to fit but need to know how far from the back of the cab they go. If someone could measure from the cab rear bulkhead to the centre-line of the socket, that would be great,

Many Thanks,

JR

User avatar
woodypup59
Posts: 1058
Joined: Thu Jun 24, 2010 5:28 pm
Location: London UK

Re: Wanted - measurement from Mini Pickup

Post by woodypup59 »

25 1/2" from the back of the car, 24 3/4 " from the cab back wall - ie not quite equidistant front to back.

Just forward of the front edge of the big hole in the rear wheel arch stiffener.
You do not have the required permissions to view the files attached to this post.

jayare
Posts: 132
Joined: Sat Oct 31, 2015 11:23 pm
Location: Buckinghamshire

Re: Wanted - measurement from Mini Pickup

Post by jayare »

Fantastic!

Thank you very much,

JR

Post Reply