Hydrolastic displacer cone/mushroom

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

Rev 1.1 (27.07.15)
Post Reply
rogerotto66s
Posts: 136
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Hydrolastic displacer cone/mushroom

Post by rogerotto66s »

Mk1 S in the USA

Need the metal cone/mushroom which is held onto the rubber displacer by a built-in o-ring.
The knuckle dowel slides into this cone and the dust cover slips onto its stem.

Mine has become distorted over time. Looks like it was no seated properly in the o-ring.

My cone measures 2” in height.
Roger Williams

rogerotto66s
Posts: 136
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Hydrolastic displacer cone/mushroom

Post by rogerotto66s »

I located a used cone. Mini City in USA had a used one.

Here are a few pictures of my old cone.
You can see the distortion.
You do not have the required permissions to view the files attached to this post.
Roger Williams

Post Reply