mk1-forum.net
http://mk1-forum.net/

Wanted nos Lockheed clutch mastercylinder
http://mk1-forum.net/viewtopic.php?f=8&t=25690
Page 1 of 1

Author:  66Traveller [ Thu Jun 20, 2019 8:06 am ]
Post subject:  Wanted nos Lockheed clutch mastercylinder

I've discovered the one I have isn't for a Mini (it is back to front when fitted - arrghhh! ) - does anybody have one - good price paid!

Author:  woodypup59 [ Thu Jun 20, 2019 1:04 pm ]
Post subject:  Re: Wanted nos Lockheed clutch mastercylinder

Have a care when looking for brake and clutch master cylinders on Ebay etc.

People mix up the descriptions.

On a BRAKE m/cyl, the axis of the fixing flange holes is at about 90' to the axis of the filling port & hydrualic pipe connection.
Attachment:
brake 1.jpg

Also, the Brake cyl has the extra NRV valve (in red) which the clutch m/c doens't have.

On a CLUTCH m/cyl, the axis of the fixing flange holes is at about 10' to the axis of the filling port & hydrualic pipe connection.
Attachment:
clutch 1.jpg

Author:  66Traveller [ Fri Jun 21, 2019 12:18 pm ]
Post subject:  Re: Wanted nos Lockheed clutch mastercylinder

Thanks - that is very helpful indeed!

Author:  BRI MK1 [ Fri Jun 21, 2019 8:08 pm ]
Post subject:  Re: Wanted nos Lockheed clutch mastercylinder

David Kingerly is your man 01332 873685 07977 914088

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/