mk1-forum.net

A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
It is currently Mon May 20, 2019 9:38 pm

All times are UTC [ DST ]


Forum rules


1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

Rev 1.1 (27.07.15)



Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sun May 12, 2019 10:50 am 
Offline

Joined: Mon May 11, 2015 4:16 pm
Posts: 409
Location: Scotland
I’m chasing an early vented tappet chest cover. It has the vent placed on the right hand side of the cover and is swan neck type. Part number is 12H948 and appears like this in AKD3502.

Attachment:
54DE3564-A95B-41FC-B6F7-0DB578378BAB.jpeg


I shan’t be holding my breath as it’s a long shot that someone might have one.

D


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun May 12, 2019 1:08 pm 
Offline

Joined: Sat May 24, 2014 7:12 am
Posts: 1595
Have a few of these but I am overseas
Cheers
D


Top
 Profile  
 
PostPosted: Sun May 12, 2019 3:13 pm 
Offline

Joined: Mon May 30, 2016 1:04 pm
Posts: 549
Location: Norfolks highest point
I have one from a 63 but it’s not swan necked


Top
 Profile  
 
PostPosted: Sun May 12, 2019 3:18 pm 
Offline

Joined: Mon May 11, 2015 4:16 pm
Posts: 409
Location: Scotland
360gts wrote:
Have a few of these but I am overseas
Cheers
D


Pm sent


Top
 Profile  
 
PostPosted: Sun May 12, 2019 3:18 pm 
Offline

Joined: Mon May 11, 2015 4:16 pm
Posts: 409
Location: Scotland
Beatie wrote:
I have one from a 63 but it’s not swan necked


PM sent


Top
 Profile  
 
PostPosted: Sun May 12, 2019 9:26 pm 
Offline

Joined: Sat May 24, 2014 7:12 am
Posts: 1595
Well, when I said I have a few....I do....but they are nearly all what everyone else has.....Left hand or straight...however, I did find this one. Was a bit damaged...did a little weld repair.
Not a perfect item as it has some pitting on the pipe. Have no idea what it is off or when I obtained it...been in the box of others for years.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon May 13, 2019 7:54 am 
Offline

Joined: Mon May 11, 2015 4:16 pm
Posts: 409
Location: Scotland
360gts wrote:
Well, when I said I have a few....I do....but they are nearly all what everyone else has.....Left hand or straight...however, I did find this one. Was a bit damaged...did a little weld repair.
Not a perfect item as it has some pitting on the pipe. Have no idea what it is off or when I obtained it...been in the box of others for years.


The upper one looks to be what I am chasing. You have another PM.

D


Top
 Profile  
 
PostPosted: Wed May 15, 2019 11:25 am 
Offline

Joined: Mon Sep 13, 2010 9:05 pm
Posts: 224
Which one should a 1964 1071 S have?

Thanks


Top
 Profile  
 
PostPosted: Wed May 15, 2019 1:27 pm 
Offline

Joined: Sat May 24, 2014 7:12 am
Posts: 1595
big-un1967 wrote:
Which one should a 1964 1071 S have?

Thanks

Think it one of the two on the left ...cork gasket type.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: 251 ENG, imack and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Localized by Maël Soucaze © 2010 phpBB.fr