Primary Gear Thrust Washers

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

Rev 1.1 (27.07.15)
Post Reply
User avatar
Rich997
Posts: 170
Joined: Tue Dec 30, 2014 3:36 pm

Primary Gear Thrust Washers

Post by Rich997 »

Hello all,

Looking for NOS or good used thrust washers.

Need a 22A324 0.116 - 0.118 urgently if you have one.

Also keen to pick up a 22A450 0.118 - 0.12 / other NOS thrust washers of any size for future use.

Appreciate any help with this, or tips on any Suppliers who may have them in stock.


Thanks,
Rich

migliacars
Posts: 278
Joined: Mon Jan 21, 2013 1:07 pm

Re: Primary Gear Thrust Washers

Post by migliacars »

Rich997 wrote:Hello all,

Looking for NOS or good used thrust washers.

Need a 22A324 0.116 - 0.118 urgently if you have one.

Also keen to pick up a 22A450 0.118 - 0.12 / other NOS thrust washers of any size for future use.

Appreciate any help with this, or tips on any Suppliers who may have them in stock.


Thanks,
Rich


i have some 998 thrust washers

User avatar
Andrew1967
Posts: 5478
Joined: Thu Jun 24, 2010 6:35 pm
Location: UK

Re: Primary Gear Thrust Washers

Post by Andrew1967 »

I have a load of NOS 850 type thrust washers ....

Will measure some up to see what I have.

User avatar
Rich997
Posts: 170
Joined: Tue Dec 30, 2014 3:36 pm

Re: Primary Gear Thrust Washers

Post by Rich997 »

Thanks both.

Looking for the 850 / 997 / 998 type.

Please let me know if you have the thicker sizes in NOS or very good condition.

Cheers,
Rich

User avatar
Andrew1967
Posts: 5478
Joined: Thu Jun 24, 2010 6:35 pm
Location: UK

Re: Primary Gear Thrust Washers

Post by Andrew1967 »

Hi Rich,

Had a look and I have 68, yes 68, NOS 850 type thrust washers BUT they are all either 0.128" or 0.130"

Regards

Andrew

User avatar
Rich997
Posts: 170
Joined: Tue Dec 30, 2014 3:36 pm

Re: Primary Gear Thrust Washers

Post by Rich997 »

Hi Andrew,

Quite a collection you have there.

I need the 997/998 type 0.116-0.118.

Thanks very much for looking.

Cheers,
Rich

Dearg1275
Posts: 855
Joined: Mon May 11, 2015 4:16 pm
Location: Scotland

Re: Primary Gear Thrust Washers

Post by Dearg1275 »

Rich997 wrote:Hi Andrew,

Quite a collection you have there.

I need the 997/998 type 0.116-0.118.

Thanks very much for looking.

Cheers,
Rich
Have you tried Somerford? They had some none standard sizes a while ago.

D

User avatar
Rich997
Posts: 170
Joined: Tue Dec 30, 2014 3:36 pm

Re: Primary Gear Thrust Washers

Post by Rich997 »

Thanks D.

Had a look on their site, the two larger sizes are showing No Stock.

Probably worth a call anyway.

Cheers,
Rich

User avatar
JohnA
Posts: 553
Joined: Sat May 10, 2014 11:45 am
Location: Up north where men are men and sheep are frightened

Re: Primary Gear Thrust Washers

Post by JohnA »

I have quite a number of 998 thrust washers
I'm sure l have some 0.120s
I'll check tomorrow and see what l have

Surgeryman
Posts: 47
Joined: Wed Mar 19, 2014 10:33 pm
Location: Hampshire, UK

Re: Primary Gear Thrust Washers

Post by Surgeryman »

Rich

I have a NOS 22A324 thrust washer available. PM me your address and I will send it to you.

Peter

Post Reply