Mk1 rear light screw fibre washers

Want to sell something? Here's the place to list it for free! (DIRECT SALES / SWAPS) No ebay links please.
Forum rules
For Sale Section Rules

PLEASE NOTE! Postings in this section are deleted automatically after they have not been looked at for 30 days.

1) This section is for advertising items that you have for sale. Not for the discussion of listed items. If you wish to debate the pro's & Con's of any item listed, please start a new topic in the appropriate section.

2) Please DO NOT post links to your ebay auctions. This section is NOT for the advertisement of your ebay auctions.

3) If you have a number of items to sell, post them in a single ad marked "Multiple Parts" or similar. DO NOT post many individual advertisements as this forces everyone else's listings down the page.

4) It is expected that any items advertised on the forum are described fairly & honestly. It is the duty of the seller to ensure that this is the case.

5) Items listed for sale should WHEREVER POSSIBLE* be offered with a purchase price, not asking for bids from members. If you wish to auction your item to the highest bidder I would suggest you use ebay & pay the associated fees.

6) This section is offered as a free service to enthusiasts. Any deals made are between the buyer & seller only. The MK1 forum takes no part in any transaction & the appearance of any item in this section is not a recommendation. I strongly suggest that both buyers & sellers are happy to proceed with a deal before any money or goods change hands.

7) It expected that people posting items for sale are "Active Members of this community". Any Adverts placed by members with a post count lower than 5 will be deleted.

8) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden. Any member breaking this rule will have his membership terminated with immediate effect.

9) If a moderator considers any postings in this section to violate either the spirit or word of these simple requests the MK1 Forum reserves the right to delete any posts without prior warning or explanation.

10) The posting of items for sale on the MK1 forum constitutes explicit acceptance of these simple rules.

11) Members posting items for sale MUST include a rough location in their profile.

It would be much appreciated if sellers could leave the sale price on adverts after the item has been sold. This acts as a good measure of current value for other sellers.

* In some cases it may not be possible for the seller to list items with a sale price. In this case, listings will be reviewed on a case by case basis by a moderator. The moderators decision will be final.

Mark S Forster
(MK1 Performance Conversions)
Rev 2.10 (06.10.20)
User avatar
alex-95
Posts: 42
Joined: Fri May 08, 2015 10:30 am

Mk1 rear light screw fibre washers

Post by alex-95 »

I have a 4 sets of Mk1 rear light screw fibre washers. This is for 6 washers to suit the original screws with the 3/16" diameter shank (as shown in the second photo of stainless ones I've machined), The ID and OD has been machined to the original dimension from a stock fibre washer.

Please PM me if you're interested

£3.45 posted for 6. I can do them a bit cheaper if more that 1 set is bought.
Image
Image

Thanks
Alex
Last edited by alex-95 on Mon Jan 25, 2021 8:18 pm, edited 2 times in total.
User avatar
alex-95
Posts: 42
Joined: Fri May 08, 2015 10:30 am

Re: Mk1 rear light screw fibre washers

Post by alex-95 »

Sold! I can machine some more sets if theres enough interest.

Alex
User avatar
Andrew1967
Posts: 6133
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: Mk1 rear light screw fibre washers

Post by Andrew1967 »

Alex, have you also machined those screws, or have I misconstrued your post ?

Will check my rear lights, think I could do with a set of the fibre washers.
DB1380
Posts: 147
Joined: Wed Jun 26, 2019 6:00 am
Location: 10 miles from Ipswich Suffolk

Re: Mk1 rear light screw fibre washers

Post by DB1380 »

Alex, i'll take a set of these please if you do more. I know im missing one or two on my lights.

Tia, Dicky.
Cheers Dicky.

KPB 729C 65 Mini Minor 1380
gray1275s
Posts: 31
Joined: Sat Dec 20, 2014 9:06 pm
Location: East Sussex

Re: Mk1 rear light screw fibre washers

Post by gray1275s »

Hi if there in stainless steel I'll take six sets because all mine are rusty let me know when you're ready. Alex I will sort out payment thank mark
hanlminiman
Posts: 596
Joined: Thu Jun 24, 2010 3:12 pm
Location: Still in a Car Home in North Cotswolds, close to Prescott Hill Climb & Stratford upon Avon UK

Re: Mk1 rear light screw fibre washers

Post by hanlminiman »

I'd like 3 sets please, if you are doing some more.
Cliff
User avatar
alex-95
Posts: 42
Joined: Fri May 08, 2015 10:30 am

Re: Mk1 rear light screw fibre washers

Post by alex-95 »

Sorry just seen this
DB1380 wrote: Thu Dec 10, 2020 10:57 pm Alex, i'll take a set of these please if you do more. I know im missing one or two on my lights.

Tia, Dicky.
Pm me and we'll sort payment etc
gray1275s wrote: Fri Dec 11, 2020 1:01 pm Hi if there in stainless steel I'll take six sets because all mine are rusty let me know when you're ready. Alex I will sort out payment thank mark
I don't currently have any screws but yes they are all stainless, made with stainless rod and a screw in the end, I've had a set on mine for 3 years and they're still like when I made them. I'm hoping to make a batch soon if you could wait?
hanlminiman wrote: Sun Dec 13, 2020 2:51 pm I'd like 3 sets please, if you are doing some more.
Cliff
Ok, Pm me please.
Andrew1967 wrote: Thu Dec 10, 2020 9:46 pm Alex, have you also machined those screws, or have I misconstrued your post ?

Will check my rear lights, think I could do with a set of the fibre washers.
Yep, machined the screws, as a move stainless rod and a screw in the end.

Ok, Pm me if you require a set.
User avatar
alex-95
Posts: 42
Joined: Fri May 08, 2015 10:30 am

Re: Mk1 rear light screw fibre washers

Post by alex-95 »

Got another batch ready, only 6 sets left.

Cheers Alex
User avatar
alex-95
Posts: 42
Joined: Fri May 08, 2015 10:30 am

Re: Mk1 rear light screw fibre washers

Post by alex-95 »

All sold again, will do another batch if theres enough interest.

Cheers Alex
User avatar
Andrew1967
Posts: 6133
Joined: Thu Jun 24, 2010 6:35 pm
Location: Usually in my garage on the east coast of Norfolk, UK

Re: Mk1 rear light screw fibre washers

Post by Andrew1967 »

Just received a set of Alex's screws and fibre washers.

Very pleased with them and fitted perfectly. Thanks Alex 8-)
You do not have the required permissions to view the files attached to this post.
Post Reply