New switch plate - will need filing

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's. Includes information on MK1 Action days.
Post Reply
AndyPen
Posts: 1459
Joined: Mon Jul 24, 2017 5:55 pm

New switch plate - will need filing

Post by AndyPen »

Was pleased to spot this at Somerfords when I visited a while back as all of mine are rusty and would need a lot of paint.

Luckily the screw holes are in the correct location but if you get one, be warned as you'll need to open up every hole for the switches and cables ;-(

You can even spot the difference visually (and yes the cables are in the wrong holes - had just filed them out). It will still look nice when done, just thought I should share so you can do the filing up front and not have to remove it again like I did.

;-)

switch-plates.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
surfblue63
Posts: 4558
Joined: Wed Jan 12, 2011 9:13 pm
Location: North East

Re: New switch plate - will need filing

Post by surfblue63 »

M-Machine list all the variations priced at £13.20 inc VAT

Page 41 on the following link http://preview.m-machine.co.uk/wp-conte ... or-web.pdf

Not sure if that's were Somerford get theirs.
Switch Panels.jpg
You do not have the required permissions to view the files attached to this post.
'ad a luv affair wiv Nina, in da back of my Cortina...

User avatar
mk1
Site Admin
Posts: 14470
Joined: Thu Jun 24, 2010 11:30 am
Location: Up a tree in the Herb Garden.
Contact:

Re: New switch plate - will need filing

Post by mk1 »

Sommerfords have been agents for M-Machine panels fro many, many years.
Mark F
I'm a rather fat feathery Owl called sage.

Post Reply