mk1-forum.net

A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
It is currently Wed Jan 17, 2018 4:16 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Binnacle trim
PostPosted: Thu Jan 11, 2018 11:59 pm 
Offline

Joined: Fri May 08, 2015 10:30 am
Posts: 19
I'm Making a binnacle similar to the original but the length of the chrome strip that goes around needs to be slightly longer. Does anybody know where I could get some or similar rather than buying 2 from minispares and cut one up. This is what I'm after http://www.minispares.com/product/Classic/Interior/Dash/14A9907.aspx?1702&ReturnUrl=/search/classic/binnacle.aspx%7CBack%20to%20search

Also does the trim bend easily to form a different shape or does it kink?


Cheers Alex


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Fri Jan 12, 2018 11:18 am 
Online
User avatar

Joined: Sat Jul 15, 2017 5:35 pm
Posts: 698
Location: Abingdon Oxfordshire
I'm not quite sure but I would say with almost certainty that being anodised, the actual material would bend but the anodising coating would crack or craze.


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Fri Jan 12, 2018 2:39 pm 
Offline
Site Admin
User avatar

Joined: Thu Jun 24, 2010 11:30 am
Posts: 10045
Location: Oop North where it's dark & cold nearly all the time.
Isn't that trim stainless? If so it will be very hard to bend.

Probably easier to go for something like this.

https://www.ebay.co.uk/itm/6mm-X-15M-CH ... Swmh1Z34hM

_________________
Mark F
(I'm a very friendly Lion called Parsley)


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Fri Jan 12, 2018 9:11 pm 
Offline

Joined: Fri May 08, 2015 10:30 am
Posts: 19
Thanks guys, I'm pretty sure its stainless as it doesn't have any rust or pitting on it that I can recall but could be chromed steel. I don't think you can anodise to that great of shine.
Thats an option but sure it would stick well enough if it's curved around the binnacle.


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Sat Jan 13, 2018 10:19 am 
Online
User avatar

Joined: Sat Jul 15, 2017 5:35 pm
Posts: 698
Location: Abingdon Oxfordshire
I only remember it fairly well because I tool it off the instrument binnacle of one of my mini Cooper and fitted a small motor cycle 30-0-30 ammeter above the temp gauge by jiggling the temp gauge position. Then had to re-face the binnacle with a piece of wood grain formica. Refitted the trim back, drilled through original clip holes and it looked a treat. :Let us know what it is, but I think you'll find that..................


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Sat Jan 13, 2018 12:25 pm 
Offline
User avatar

Joined: Thu Aug 08, 2013 3:16 pm
Posts: 6114
its stainless and you would need to be the hulk to bend it, its well hard, it will be formed on a mandrel roller or something like that when its new, I doubt anyone could bend it by hand and get it looking decent

_________________
should you wish, you can contact me on rich@minispares.com

'long beard boss'


Top
 Profile  
 
 Post subject: Re: Binnacle trim
PostPosted: Sat Jan 13, 2018 2:24 pm 
Offline

Joined: Fri May 08, 2015 10:30 am
Posts: 19
Ok thanks, not what I wanted to hear haha :lol: , I just emailed minispares about it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: 111Robin, gazwad, nick rogers, Yahoo [Bot] and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Localized by MaĆ«l Soucaze © 2010 phpBB.fr