mk1-forum.net
http://mk1-forum.net/

suspension height
http://mk1-forum.net/viewtopic.php?f=30&t=18540
Page 1 of 1

Author:  sutton phil [ Sat Mar 18, 2017 6:46 pm ]
Post subject:  suspension height

Hi all ! I have a 67 cooper S on wet suspension,the front end sits a little low for my liking.ive heard talk of washers to lift the height, is this true & where does it go ? Never done this mod before so forgive me for being thick ! And help would be great thanks

Author:  1071 S [ Sat Mar 18, 2017 10:45 pm ]
Post subject:  Re: suspension height

The washers go on the shank of the front ball joint; the one that goes between the upper suspension arm and the hydro unit. This works for dry cars and should for hydro units as well.

Cheers, Ian

Author:  Ronnie [ Sat Mar 18, 2017 11:00 pm ]
Post subject:  Re: suspension height

Check this link on the main site Page 11 it should assist you ;) > http://mk1-performance-conversions.co.u ... D-5096.pdf

Author:  Gray [ Sun Mar 19, 2017 8:09 am ]
Post subject:  Re: suspension height

There are 2 size balljoints one has a slightly longer lenght to it which will raise the front if still to low add the washers.

Author:  sutton phil [ Sun Mar 19, 2017 4:26 pm ]
Post subject:  Re: suspension height

Thanks very much for the help lads, will look into it.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/